Creating a BFS volume on a partition >60GB

The problem isn’t with the BFS itself; it’s with a program called mkbfs. Fortunately, this error was fixed by Be Inc. in an unreleased version of the BeOS nicknamed „Dano“.
– Boot using any working R5 / Dano BeOS installation, from HD or CD.
– Replace the R5
mkbfs (if any) with Dano’s, found in /boot/beos/bin/
– Start DriveSetup and create a partition of the desired size as BFS.

When booting from a CD-ROM, you’ll have to use the Terminal to turn the created partition into a BFS volume.
The partitions can be found in /dev/disk/ and for me the entire path is:
/dev/disk/ide/ata/0/master/0/ which contains the „files“:
0_0 0_1 0_2 raw
You can use DiskProbe to find out which partition is the right one by looking at the total number of blocks.
If you only have:
0_0 raw
you type: mkbfs /dev/disk/ide/ata/0/master/0/0_0
Note: I submit this tip based on the help and tips Bruno G. Albuquerque provided on Beshare.


Comments: 1


This is not required for Haiku. The Haiku DriveSetup application can initialize large partitions.



(comments are closed)